Create a CI pipeline for dockerized PHP Apps with Github and Gitlab


In the seventh part of this tutorial series on developing PHP on Docker we will setup a CI
(Continuous Integration) pipeline to run code quality tools and tests on Github Actions and Gitlab
Pipelines
.

All code samples are publicly available in my
Docker PHP Tutorial repository on github.
You find the branch for this tutorial at
part-7-ci-pipeline-docker-php-gitlab-github.

Published parts of the Docker PHP Tutorial

If you want to follow along, please subscribe to the RSS feed
or via email
to get automatic notifications when the next part comes out 🙂

Table of contents

Introduction

CI is short for Continuous Integration and to me mostly means running the code quality
tools and tests of a codebase in an isolated environment
(preferably automatically). This is
particularly important when working in a team, because the CI system acts as the final
gatekeeper
before features or bugfixes are merged into the main branch.

I initially learned about CI systems when I stubbed my toes into the open source water. Back in the
day I used Travis CI for my own projects and replaced it
with Github Actions at some point. At ABOUT YOU we started
out with a self-hosted Jenkins server and then moved on to
Gitlab CI as a fully
managed solution (though we use custom runners).

Recommended reading

This tutorial builds on top of the previous parts. I’ll do my best to cross-reference the
corresponding articles when necessary, but I would still recommend to do some upfront reading on:

And as a nice-to-know:

Approach

In this tutorial I’m going to explain how to make our existing docker setup work with Github Actions
and Gitlab CI/CD Pipelines
. As I’m a big fan of a
“progressive enhancement” approach, we will ensure that all necessary steps can be performed
locally through make
. This has the additional benefit of keeping a single source of truth (the
Makefile) which will come in handy when we set up the CI system on two different providers
(Github and Gitlab).

The general process will look very similar to the one for local development:

  • build the docker setup
  • start the docker setup
  • run the qa tools
  • run the tests

You can see the final results in the CI setup section, including the concrete yml
files and links to the repositories, see

On a code level, we will treat CI as an environment, configured through the env variable ENV. So
far we only used ENV=local and we will extend that to also use ENV=ci. The necessary changes
are explained after the concrete CI setup instructions in the sections

Try it yourself

To get a feeling for what’s going on, you can start by
executing the local CI run:

This should give you a similar output as presented in the Execution example.

git checkout part-7-ci-pipeline-docker-php-gitlab-github

# Initialize make
make make-init

# Execute the local CI run
bash .local-ci.sh

CI setup

General CI notes

Initialize make for CI

As a very first step we need to “configure” the codebase to operate for the ci environment.
This is done through the make-init target as explained later in more detail in the
Makefile changes section via

make make-init ENVS="ENV=ci TAG=latest EXECUTE_IN_CONTAINER=true GPG_PASSWORD=12345678"
$ make make-init ENVS="ENV=ci TAG=latest EXECUTE_IN_CONTAINER=true GPG_PASSWORD=12345678"
Created a local .make/.env file

ENV=ci ensures that we

TAG=latest is just a simplification for now because we don’t do anything with the images yet.
In an upcoming tutorial we will push them to a container registry for later usage in production
deployments and then set the TAG to something more meaningful (like the build number).

EXECUTE_IN_CONTAINER=true forces every make command that uses a
RUN_IN_*_CONTAINER setup
to run in a container. This is important, because the Gitlab runner will actually run in a
docker container itself
. However, this would cause any affected target to omit the
$(DOCKER_COMPOSER) exec prefix
.

Execute all targets in the application docker container

GPG_PASSWORD=12345678 is the password for the secret gpg key as mentioned in
Add a password-protected secret gpg key.

wait-for-service.sh

I’ll explain the “container is up and running but the underlying service is not” problem
for the mysql service and how we can solve it with a health check later in this article at
Adding a health check for mysql.
On purpose, we don’t want docker compose to take care of the waiting because we can make
“better use of the waiting time” and will instead implement it ourselves with a simple bash
script located at .docker/scripts/wait-for-service.sh:

#!/bin/bash

name=$1
max=$2
interval=$3

[ -z "$1" ] && echo "Usage example: bash wait-for-service.sh mysql 5 1"
[ -z "$2" ] && max=30
[ -z "$3" ] && interval=1

echo "Waiting for service '$name' to become healthy, checking every $interval second(s) for max. $max times"

while true; do 
  ((i++))
  echo "[$i/$max] ..."; 
  status=$(docker inspect --format "" "$(docker ps --filter name="$name" -q)")
  if echo "$status" | grep -q '"healthy"'; then 
   echo "SUCCESS";
   break
  fi
  if [ $i == $max ]; then 
    echo "FAIL"; 
    exit 1
  fi 
  sleep $interval; 
done

This script waits for a docker $service to become “healthy” by
checking the .State.Health.Status info
of the docker inspect command.

CAUTION: The script uses $(docker ps --filter name="$name" -q) to determine the id of the
container, i.e. it will “match” all running containers against the $name – this would fail if
there is more than one matching container! I.e. you must ensure that $name is specific
enough to identify one single container uniquely.

The script will check up to $max times
in a interval of $interval seconds. See these
answers on the
“How do I write a retry logic in script to keep retrying to run it up to 5 times?” question for
the implementation of the retry logic. To check the health of the mysql service for 5
times with 1 seconds between each try, it can be called via

bash wait-for-service.sh mysql 5 1

Output

$ bash wait-for-service.sh mysql 5 1
Waiting for service 'mysql' to become healthy, checking every 1 second(s) for max. 5 times
[1/5] ...
[2/5] ...
[3/5] ...
[4/5] ...
[5/5] ...
FAIL

# OR

$ bash wait-for-service.sh mysql 5 1
Waiting for service 'mysql' to become healthy, checking every 1 second(s) for max. 5 times
[1/5] ...
[2/5] ...
SUCCESS

The problem of “container dependencies” isn’t new and there are already some existing solutions
out there, e.g.

But unfortunately all of them operate by checking the availability of a host:port combination
and in the case of mysql that didn’t help, because the container was up, the port was reachable
but the mysql service in the container was not.

Setup for a “local” CI run

As mentioned under Approach, we want to be able to perform all necessary steps
locally and I created a corresponding script at .local-ci.sh:

#!/bin/bash
# fail on any error 
# @see https://stackoverflow.com/a/3474556/413531
set -e

make docker-down ENV=ci || true

start_total=$(date +%s)

# STORE GPG KEY
cp secret-protected.gpg.example secret.gpg

# DEBUG
docker version
docker compose version
cat /etc/*-release || true

# SETUP DOCKER
make make-init ENVS="ENV=ci TAG=latest EXECUTE_IN_CONTAINER=true GPG_PASSWORD=12345678"
start_docker_build=$(date +%s)
make docker-build
end_docker_build=$(date +%s)
mkdir -p .build && chmod 777 .build

# START DOCKER
start_docker_up=$(date +%s)
make docker-up
end_docker_up=$(date +%s)
make gpg-init
make secret-decrypt-with-password

# QA
start_qa=$(date +%s)
make qa || FAILED=true
end_qa=$(date +%s)

# WAIT FOR CONTAINERS
start_wait_for_containers=$(date +%s)
bash .docker/scripts/wait-for-service.sh mysql 30 1
end_wait_for_containers=$(date +%s)

# TEST
start_test=$(date +%s)
make test || FAILED=true
end_test=$(date +%s)

end_total=$(date +%s)

# RUNTIMES
echo "Build docker:        " `expr $end_docker_build - $start_docker_build`
echo "Start docker:        " `expr $end_docker_up - $start_docker_up  `
echo "QA:                  " `expr $end_qa - $start_qa`
echo "Wait for containers: " `expr $end_wait_for_containers - $start_wait_for_containers`
echo "Tests:               " `expr $end_test - $start_test`
echo "---------------------"
echo "Total:               " `expr $end_total - $start_total`

# CLEANUP
# reset the default make variables
make make-init
make docker-down ENV=ci || true

# EVALUATE RESULTS
if [ "$FAILED" == "true" ]; then echo "FAILED"; exit 1; fi

echo "SUCCESS"

Run details

  • as a preparation step, we first ensure that no outdated ci containers are running (this is
    only necessary locally, because runners on a remote CI system will start “from scratch”)

    make docker-down ENV=ci || true
  • we take some time measurements to understand how long certain parts take via
    start_total=$(date +%s)

    to store the current timestamp

  • we need the secret gpg key in order to decrypt the secrets and simply copy the
    password-protected example key
    (in the actual CI systems the key will be configured as a secret value that is injected in
    the run)

    # STORE GPG KEY
    cp secret-protected.gpg.example secret.gpg
  • I like printing some debugging info in order to understand which exact circumstances
    we’re dealing with (tbh, this is mostly relevant when setting the CI system up or making
    modifications to it)

    # DEBUG
    docker version
    docker compose version
    cat /etc/*-release || true
  • for the docker setup, we start with
    initializing the environment for ci

    # SETUP DOCKER
    make make-init ENVS="ENV=ci TAG=latest EXECUTE_IN_CONTAINER=true GPG_PASSWORD=12345678"

    then build the docker setup

    make docker-build

    and finally add a .build/ directory to
    collect the build artifacts

    mkdir -p .build && chmod 777 .build
  • then, the docker setup is started
    # START DOCKER
    make docker-up

    and gpg is initialized so that
    the secrets can be decrypted

    make gpg-init
    make secret-decrypt-with-password

    We don’t need to pass a GPG_PASSWORD to secret-decrypt-with-password because we have set
    it up in the previous step as a default value via make-init

  • once the application container is running, the qa tools are run by invoking the
    qa make target

    # QA
    make qa || FAILED=true

    The || FAILED=true part makes sure that the script will not be terminated if the checks fail.
    Instead, the fact that a failure happened is “recorded” in the FAILED variable so that we
    can evaluate it at the end. We don’t want the script to stop here because we want the
    following steps to be executed as well (e.g. the tests).

  • to mitigate the
    mysql is not ready” problem, we will now apply the
    wait-for-service.sh script

    # WAIT FOR CONTAINERS
    bash .docker/scripts/wait-for-service.sh mysql 30 1
  • once mysql is ready, we can execute the tests via the
    test make target and
    apply the same || FAILED=true workaround as for the qa tools

    # TEST
    make test || FAILED=true
  • finally, all the timers are printed
    # RUNTIMES
    echo "Build docker:        " `expr $end_docker_build - $start_docker_build`
    echo "Start docker:        " `expr $end_docker_up - $start_docker_up  `
    echo "QA:                  " `expr $end_qa - $start_qa`
    echo "Wait for containers: " `expr $end_wait_for_containers - $start_wait_for_containers`
    echo "Tests:               " `expr $end_test - $start_test`
    echo "---------------------"
    echo "Total:               " `expr $end_total - $start_total`
  • we clean up the resources (this is only necessary when running locally, because the runner of
    a CI system would be shut down anyways)

    # CLEANUP
    make make-init
    make docker-down ENV=ci || true
  • and finally evaluate if any error occurred when running the qa tools or the tests

    # EVALUATE RESULTS
    if [ "$FAILED" == "true" ]; then echo "FAILED"; exit 1; fi
    
    echo "SUCCESS"

Execution example

Executing the script via

bash .local-ci.sh

yields the following (shortened) output:

$ bash .local-ci.sh
Container dofroscra_ci-redis-1  Stopping
# Stopping all other `ci` containers ...
# ...

Client:
 Cloud integration: v1.0.22
 Version:           20.10.13
# Print more debugging info ...
# ...

Created a local .make/.env file
ENV=ci TAG=latest DOCKER_REGISTRY=docker.io DOCKER_NAMESPACE=dofroscra APP_USER_NAME=application APP_GROUP_NAME=application docker compose -p dofroscra_ci --env-file ./.docker/.env -f ./.docker/docker-compose/docker-compose-php-base.yml build php-base
#1 [internal] load build definition from Dockerfile
# Output from building the docker containers 
# ...

ENV=ci TAG=latest DOCKER_REGISTRY=docker.io DOCKER_NAMESPACE=dofroscra APP_USER_NAME=application APP_GROUP_NAME=application docker compose -p dofroscra_ci --env-file ./.docker/.env -f ./.docker/docker-compose/docker-compose.local.ci.yml -f ./.docker/docker-compose/docker-compose.ci.yml up -d
Network dofroscra_ci_network  Creating
# Starting all `ci` containers ...
# ...

"C:/Program Files/Git/mingw64/bin/make" -s gpg-import GPG_KEY_FILES="secret.gpg"
gpg: directory '/home/application/.gnupg' created
gpg: keybox '/home/application/.gnupg/pubring.kbx' created
gpg: /home/application/.gnupg/trustdb.gpg: trustdb created
gpg: key D7A860BBB91B60C7: public key "Alice Doe protected <[email protected]>" imported
# Output of importing the secret and public gpg keys
# ...

"C:/Program Files/Git/mingw64/bin/make" -s git-secret ARGS="reveal -f -p 12345678"
git-secret: done. 1 of 1 files are revealed.
"C:/Program Files/Git/mingw64/bin/make" -j 8 -k --no-print-directory --output-sync=target qa-exec NO_PROGRESS=true
phplint                             done   took 4s
phpcs                               done   took 4s
phpstan                             done   took 8s
composer-require-checker            done   took 8s
Waiting for service 'mysql' to become healthy, checking every 1 second(s) for max. 30 times
[1/30] ...
SUCCESS
PHPUnit 9.5.19 #StandWithUkraine

........                                                            8 / 8 (100%)

Time: 00:03.077, Memory: 28.00 MB

OK (8 tests, 15 assertions)
Build docker:         12
Start docker:         2
QA:                   9
Wait for containers:  3
Tests:                5
---------------------
Total:                46
Created a local .make/.env file

Container dofroscra_ci-application-1  Stopping
Container dofroscra_ci-mysql-1  Stopping
# Stopping all other `ci` containers ...
# ...

SUCCESS

Setup for Github Actions

Github Action example

If you are completely new to Github Actions, I recommend to start with the
official Quickstart Guide for GitHub Actions
and the
Understanding GitHub Actions
article. In short:

  • Github Actions are based on so called Workflows
    • Workflows are yaml files that live in the special .github/workflows directory in the
      repository
  • a Workflow can contain multiple Jobs
  • each Job consists of a series of Steps
  • each Step needs a run: element that represents a command that is executed by a new shell

The Workflow file

Github Actions are triggered automatically based on the files in the .github/workflows directory.
I have added the file .github/workflows/ci.yml with the following content:

name: CI build and test

on:
  # automatically run for pull request and for pushes to branch "part-7-ci-pipeline-docker-php-gitlab-github"
  # @see https://stackoverflow.com/a/58142412/413531
  push:
    branches:
      - part-7-ci-pipeline-docker-php-gitlab-github
  pull_request: {}
  # enable to trigger the action manually
  # @see https://github.blog/changelog/2020-07-06-github-actions-manual-triggers-with-workflow_dispatch/
  # CAUTION: there is a known bug that makes the "button to trigger the run" not show up
  # @see https://github.community/t/workflow-dispatch-workflow-not-showing-in-actions-tab/130088/29
  workflow_dispatch: {}

jobs:
  build:

    runs-on: ubuntu-latest

    steps:
      - uses: actions/[email protected]

      - name: start timer
        run: |
          echo "START_TOTAL=$(date +%s)" > $GITHUB_ENV

      - name: STORE GPG KEY
        run: |
          # Note: make sure to wrap the secret in double quotes (")
          echo "$" > ./secret.gpg

      - name: SETUP TOOLS
        run : |
          DOCKER_CONFIG=${DOCKER_CONFIG:-$HOME/.docker}
          # install docker compose
          # @see https://docs.docker.com/compose/cli-command/#install-on-linux
          # @see https://github.com/docker/compose/issues/8630#issuecomment-1073166114
          mkdir -p $DOCKER_CONFIG/cli-plugins 
          curl -sSL https://github.com/docker/compose/releases/download/v2.2.3/docker-compose-linux-$(uname -m) -o $DOCKER_CONFIG/cli-plugins/docker-compose
          chmod +x $DOCKER_CONFIG/cli-plugins/docker-compose

      - name: DEBUG
        run: |
          docker compose version
          docker --version
          cat /etc/*-release

      - name: SETUP DOCKER
        run: |
          make make-init ENVS="ENV=ci TAG=latest EXECUTE_IN_CONTAINER=true GPG_PASSWORD=$"
          make docker-build
          mkdir .build && chmod 777 .build

      - name: START DOCKER
        run: |
          make docker-up
          make gpg-init
          make secret-decrypt-with-password

      - name: QA
        run: |
          # Run the tests and qa tools but only store the error instead of failing immediately
          # @see https://stackoverflow.com/a/59200738/413531
          make qa || echo "FAILED=qa" >> $GITHUB_ENV

      - name: WAIT FOR CONTAINERS
        run: |
          # We need to wait until mysql is available.
          bash .docker/scripts/wait-for-service.sh mysql 30 1 

      - name: TEST
        run: |
          make test || echo "FAILED=test $FAILED" >> $GITHUB_ENV

      - name: RUNTIMES
        run: |
          echo `expr $(date +%s) - $START_TOTAL`

      - name: EVALUATE
        run: |
          # Check if $FAILED is NOT empty
          if [ ! -z "$FAILED" ]; then echo "Failed at $FAILED" && exit 1; fi

      - name: upload build artifacts
        uses: actions/[email protected]
        with:
          name: build-artifacts
          path: ./.build

The steps are essentially the same as explained before at
Run details for the local run. Some additional notes:

  • I want the Action to be triggered automatically only when I
    push to branch part-7-ci-pipeline-docker-php-gitlab-github
    OR when a pull request is created (via pull_request). In addition, I want to be able to
    trigger the Action manually on any branch
    (via workflow_dispatch).

    on:
    push:
      branches:
        - part-7-ci-pipeline-docker-php-gitlab-github
    pull_request: {}
    workflow_dispatch: {}

    For a real project, I would let the action only run automatically on long-living branches like
    main or develop. The manual trigger is helpful if you just want to test your current work
    without putting it up for review. CAUTION: There is a
    known issue that “hides” the “Trigger workflow” button to trigger the action manually.

  • a new shell is started for each run: instruction, thus we must store our timer in the “global”
    environment variable $GITHUB_ENV

      - name: start timer
      run: |
        echo "START_TOTAL=$(date +%s)" > $GITHUB_ENV 

    This will be the only timer we use, because the job uses multiple steps that are timed
    automatically – so we don’t need to take timestamps manually:
    Github Action step times

  • the gpg key is configured as an
    encrypted secret named
    GPG_KEY and is stored in ./secret.gpg. The value is the content of the
    secret-protected.gpg.example file

      - name: STORE GPG KEY
        run: |
          echo "$" > ./secret.gpg

    Secrets are configured in the Github repository under Settings > Secrets > Actions at

    https://github.com/$user/$repository/settings/secrets/actions
    
    e.g.
    
    https://github.com/paslandau/docker-php-tutorial/settings/secrets/actions

    Github Action Secrets UI

  • the ubuntu-latest image doesn’t contain the docker compose plugin, thus we need to
    install it manually

      - name: SETUP TOOLS
      run : |
        DOCKER_CONFIG=${DOCKER_CONFIG:-$HOME/.docker}
        mkdir -p $DOCKER_CONFIG/cli-plugins 
        curl -sSL https://github.com/docker/compose/releases/download/v2.2.3/docker-compose-linux-$(uname -m) -o $DOCKER_CONFIG/cli-plugins/docker-compose
        chmod +x $DOCKER_CONFIG/cli-plugins/docker-compose
  • for the make initialization we need the second secret named GPG_PASSWORD – which is
    configured as 12345678 in our case, see
    Add a password-protected secret gpg key

      - name: SETUP DOCKER
        run: |
          make make-init ENVS="ENV=ci TAG=latest EXECUTE_IN_CONTAINER=true GPG_PASSWORD=$"
  • because the runner will be shutdown after the run, we need to move the build artifacts to a
    permanent location, using the
    actions/[email protected] action

      - name: upload build artifacts
        uses: actions/[email protected]
        with:
          name: build-artifacts
          path: ./.build

    You can
    download the artifacts in the Run overview UI
    Github Actions: Run overview UI shows build-artifacts

Setup for Gitlab Pipelines

Gitlab Pipeline example

If you are completely new to Gitlab Pipelines, I recommend to start with the
official Get started with GitLab CI/CD guide. In
short:

  • the core concept of Gitlab Pipelines is the Pipeline
    • it is defined in the yaml file .gitlab-ci.yml that lives in the root of the repository
  • a Pipeline can contain multiple Stages
  • each Stage consists of a series of Jobs
  • each Job contains a script section
  • the script section consists of a series of shell commands

The .gitlab-ci.yml pipeline file

Gitlab Pipelines are triggered automatically based on a .gitlab-ci.yml file located at the
root of the repository. It has the following content:

stages:
  - build_test

QA and Tests:
  stage: build_test

  rules:
    # automatically run for pull request and for pushes to branch "part-7-ci-pipeline-docker-php-gitlab-github"
    - if: '($CI_PIPELINE_SOURCE == "merge_request_event" || $CI_COMMIT_BRANCH == "part-7-ci-pipeline-docker-php-gitlab-github")'

  # see https://docs.gitlab.com/ee/ci/docker/using_docker_build.html#use-docker-in-docker
  image: docker:20.10.12

  services:
    - name: docker:dind

  script:
    - start_total=$(date +%s)

    ## STORE GPG KEY
    - cp $GPG_KEY_FILE ./secret.gpg

    ## SETUP TOOLS
    - start_install_tools=$(date +%s)
    # "curl" is required to download docker compose
    - apk add --no-cache make bash curl
    # install docker compose
    # @see https://docs.docker.com/compose/cli-command/#install-on-linux
    - mkdir -p ~/.docker/cli-plugins/
    - curl -sSL https://github.com/docker/compose/releases/download/v2.2.3/docker-compose-linux-x86_64 -o ~/.docker/cli-plugins/docker-compose
    - chmod +x ~/.docker/cli-plugins/docker-compose
    - end_install_tools=$(date +%s)

    ## DEBUG
    - docker version
    - docker compose version
    # show linux distro info
    - cat /etc/*-release

    ## SETUP DOCKER
    # Pass default values to the make-init command - otherwise we would have to pass those as arguments to every make call
    - make make-init ENVS="ENV=ci TAG=latest EXECUTE_IN_CONTAINER=true GPG_PASSWORD=$GPG_PASSWORD"
    - start_docker_build=$(date +%s)
    - make docker-build
    - end_docker_build=$(date +%s)
    - mkdir .build && chmod 777 .build

    ## START DOCKER
    - start_docker_up=$(date +%s)
    - make docker-up
    - end_docker_up=$(date +%s)
    - make gpg-init
    - make secret-decrypt-with-password

    ## QA
    # Run the tests and qa tools but only store the error instead of failing immediately
    # @see https://stackoverflow.com/a/59200738/413531
    - start_qa=$(date +%s)
    - make qa ENV=ci || FAILED=true
    - end_qa=$(date +%s)

    ## WAIT FOR CONTAINERS
    # We need to wait until mysql is available.
    - start_wait_for_containers=$(date +%s)
    - bash .docker/scripts/wait-for-service.sh mysql 30 1
    - end_wait_for_containers=$(date +%s)

    ## TEST
    - start_test=$(date +%s)
    - make test ENV=ci || FAILED=true
    - end_test=$(date +%s)

    - end_total=$(date +%s)

    # RUNTIMES
    - echo "Tools:" `expr $end_install_tools - $start_install_tools`
    - echo "Build docker:" `expr $end_docker_build - $start_docker_build`
    - echo "Start docker:" `expr $end_docker_up - $start_docker_up  `
    - echo "QA:" `expr $end_qa - $start_qa`
    - echo "Wait for containers:" `expr $end_wait_for_containers - $start_wait_for_containers`
    - echo "Tests:" `expr $end_test - $start_test`
    - echo "Total:" `expr $end_total - $start_total`

    # EVALUATE RESULTS
    # Use if-else constructs in Gitlab pipelines
    # @see https://stackoverflow.com/a/55464100/413531
    - if [ "$FAILED" == "true" ]; then exit 1; fi

  # Save the build artifact, e.g. the JUNIT report.xml file, so we can download it later
  # @see https://docs.gitlab.com/ee/ci/pipelines/job_artifacts.html
  artifacts:
    when: always
    paths:
      # the quotes are required
      # @see https://stackoverflow.com/questions/38009869/how-to-specify-wildcard-artifacts-subdirectories-in-gitlab-ci-yml#comment101411265_38055730
      - ".build/*"
    expire_in: 1 week

The steps are essentially the same as explained before under
Run details for the local run. Some additional notes:

  • we start by defining the stages of the pipeline – though that’s currently just one (build_test)
    stages:
    - build_test
  • then we define the job QA and Tests and assign it to the build_test stage
    QA and Tests:
    stage: build_test
  • I want the Pipeline to be triggered automatically only when I
    push to branch part-7-ci-pipeline-docker-php-gitlab-github
    OR when a pull request is created
    Triggering the Pipeline manually on any branch is possible by default.

    rules:
    - if: '($CI_PIPELINE_SOURCE == "merge_request_event" || $CI_COMMIT_BRANCH == "part-7-ci-pipeline-docker-php-gitlab-github")'
  • since we want to build and run docker images, we need to use a docker base image and activate the
    docker:dind service. See Use Docker to build Docker images: Use Docker-in-Docker

    image: docker:20.10.12
    
    services:
    - name: docker:dind
  • we store the secret gpg key as a secret file (using the
    “file” type) in the
    CI/CD variables configuration of the Gitlab repository
    and move it to ./secret.gpg in order to decrypt the secrets later

    ## STORE GPG KEY
    - cp $GPG_KEY_FILE ./secret.gpg

    Secrets can be configured under Settings > CI/CD > Variables at

    https://gitlab.com/$project/$repository/-/settings/ci_cd
    
    e.g.
    
    https://gitlab.com/docker-php-tutorial/docker-php-tutorial/-/settings/ci_cd

    Gitlab CI/CD Variables UI

  • the docker base image doesn’t come with all required tools, thus we need to install the
    missing ones (make, bash, curl and docker compose)

      ## SETUP TOOLS
      - apk add --no-cache make bash curl
      - mkdir -p ~/.docker/cli-plugins/
      - curl -sSL https://github.com/docker/compose/releases/download/v2.2.3/docker-compose-linux-x86_64 -o ~/.docker/cli-plugins/docker-compose
      - chmod +x ~/.docker/cli-plugins/docker-compose
  • for the initialization of make we use the $GPG_PASSWORD variable that we defined in the
    CI/CD settings

    ## SETUP DOCKER
    - make make-init ENVS="ENV=ci TAG=latest EXECUTE_IN_CONTAINER=true GPG_PASSWORD=$GPG_PASSWORD"

    Note: I have marked the variable as “masked”
    so it won’t show up in any logs

  • finally, we store the job artifacts
    artifacts:
    when: always
    paths:
      - ".build/*"
    expire_in: 1 week 

    They can be accessed in the Pipeline overview UI
    Gitlab Pipeline overview UI

Performance

Performance isn’t an issue right now, because the CI runs take only about ~1 min (Github Actions)
and ~2 min (Gitlab Pipelines), but that’s mostly because we only ship a super minimal
application and those times will go up when things get more complex. For the local setup I
used all 8 cores of my laptop. The time breakdown is roughly as follows:

Step Gitlab Github local
without cache
local
with cached images
local
with cached images + layers
SETUP TOOLS 1 0 0 0 0
SETUP DOCKER 33 17 39 39 5
START DOCKER 17 11 34 2 1
QA 17 5 10 13 1
WAIT FOR CONTAINERS 5 5 3 2 13
TESTS 3 1 3 6 3
total
(excl. runner startup)
78 43 97 70 36
total
(incl. runner startup)
139 54 97 70 36

Times taken from

Optimizing the performance is out of scope for this tutorial, but I’ll at least document my
current findings.

The caching problem on CI

A good chunk of time is usually spent on building the docker images. We did our best to optimize
the process by leveraging the layer cache and using cache mounts
(see section Build stage ci in the php-base image).
But those steps are futile on CI systems, because the corresponding runners will start “from
scratch” for every CI run
– i.e. there is no local cache that they could use. In
consequence, the full docker setup is also built “from scratch” on every run.

There are ways to mitigate that e.g.

But: None of that worked for me out-of-the-box 🙁 We will take a closer look in an upcoming
tutorial. Some reading material that I found valuable so far:

Docker changes

As a first step we need to decide which containers are required and how to provide the
codebase
.

Since our goal is running the qa tools and tests, we only need the application php container. The
tests also need a database and a queue, i.e. the mysql and redis containers are required as
well – whereas nginx, php-fpm and php-worker are not required. We’ll handle that through
dedicated docker compose configuration files that only contain the necessary services. This is
explained in more detail in section Compose file updates.

Build images for CI

In our local setup, we have shared the codebase between the host system and docker – mainly
because we wanted our changes to be reflected immediately in docker. This isn’t necessary for the
CI
use case. In fact we want our CI images as close as possible to our production images – and
those should “contain everything to run independently”. I.e. the codebase should live in the
image
– not on the host system. This will be explained in section
Use the whole codebase as build context.

Compose file updates

We will not only have some differences between the CI docker setup and the local docker setup
(=different containers), but also in the configuration of the individual services. To accommodate
for that, we will use the following docker compose config files in the
.docker/docker-compose/ directory:

  • docker-compose.local.ci.yml:
    • holds configuration that is valid for local and ci, trying to keep the config files
      DRY
  • docker-compose.ci.yml:
    • holds configuration that is only valid for ci
  • docker-compose.local.yml:
    • holds configuration that is only valid for local

When using docker compose we then need to make sure to include only the required files, e.g. for
ci:

docker compose -f docker-compose.local.ci.yml -f docker-compose.ci.yml

I’ll explain the logic for that later in
section ENV based docker compose config. In short:

Assemble docker-compose config files for CI

When comparing ci with local, for ci

  • we don’t need to share the codebase with the host system
    application:
      volumes:
      - ${APP_CODE_PATH_HOST?}:${APP_CODE_PATH_CONTAINER?}
  • we don’t need persistent volumes for the redis and mysql data

    mysql:
      volumes:
        - mysql:/var/lib/mysql
    
    redis:
      volumes:
        - redis:/data
  • we don’t need to share ports with the host system

    application:
      ports:
        - "${APPLICATION_SSH_HOST_PORT:-2222}:22"
    
    redis:
      ports:
        - "${REDIS_HOST_PORT:-6379}:6379"
  • we don’t need any settings for local dev tools like xdebug or strace
    application:
      environment:
        - PHP_IDE_CONFIG=${PHP_IDE_CONFIG?}
      cap_add:
        - "SYS_PTRACE"
      security_opt:
        - "seccomp=unconfined"
      extra_hosts:
        - host.docker.internal:host-gateway  

So all of those config values will only live in the docker-compose.local.yml file. In fact, there
are only two things that ci needs that local doesn’t:

  • a volume mount to share only the secret gpg key from the host with the application container
    application:
      volumes:
        - ${APP_CODE_PATH_HOST?}/secret.gpg:${APP_CODE_PATH_CONTAINER?}/secret.gpg:ro

    This
    is required to decrypt the secrets:

    […] the private key has to be named secret.gpg and put in the root of the codebase,
    so that the import can be be simplified with make targets

  • a volume mount to share a .build folder for build artifacts with the application container
    application:
      volumes:
        - ${APP_CODE_PATH_HOST?}/.build:${APP_CODE_PATH_CONTAINER?}/.build

    This will be used to collect any files we want to retain from a build (e.g. code coverage
    information, log files, etc.)

Adding a health check for mysql

When running the tests for the first time on a CI system, I noticed some weird errors related to the
database:

1) Tests\Feature\App\Http\Controllers\HomeControllerTest::test___invoke with data set "default" (array(), '    <li><a href="?dispatch=fo...></li>')
PDOException: SQLSTATE[HY000] [2002] Connection refused

As it turned out, the mysql container itself was up and running – but the mysql process
within the container was not yet ready to accept connections. Locally, this hasn’t been a problem,
because we usually would not run the tests “immediately” after starting the containers – but on CI
this is the case.

Fortunately, docker compose has us covered here and provides a
healtcheck configuration option:

healthcheck declares a check that’s run to determine whether or not containers for this service are “healthy”.

Since this healthcheck is also “valid” for local, I defined it in the combined
docker-compose.local.ci.yml file:

  mysql:
    healthcheck:
      # Only mark the service as healthy if mysql is ready to accept connections
      # Check every 2 seconds for 30 times, each check has a timeout of 1s
      test: mysqladmin ping -h 127.0.0.1 -u $$MYSQL_USER --password=$$MYSQL_PASSWORD
      timeout: 1s
      retries: 30
      interval: 2s

The script in test was taken
from SO: Docker-compose check if mysql connection is ready.

When starting the docker setup, docker ps will now add a health info to the STATUS:

$ make docker-up

$ docker ps
CONTAINER ID   IMAGE                            STATUS                           NAMES
b509eb2f99c0   dofroscra/application-ci:latest  Up 1 seconds                     dofroscra_ci-application-1
503e52fd9e68   mysql:8.0.28                     Up 1 seconds (health: starting)  dofroscra_ci-mysql-1

# a couple of seconds later

$ docker ps
CONTAINER ID   IMAGE                            STATUS                   NAMES
b509eb2f99c0   dofroscra/application-ci:latest  Up 13 seconds            dofroscra_ci-application-1
503e52fd9e68   mysql:8.0.28                     Up 13 seconds (healthy)  dofroscra_ci-mysql-1

Note the (health: starting) and (healthy) infos for the mysql service.

We can also get this info from docker inspect (used by our
wait-for-service.sh script) via:

$ docker inspect --format "" dofroscra_ci-mysql-1
"healthy"

FYI: We could also use the
depends_on property with a
condition: service_healthy on the application container so that docker compose would
only start the container once the mysql service is healthy:

application:
  depends_on:
    mysql: 
      condition: service_healthy

However, this would “block” the make docker-up until mysql is actually up and running. In
our case this is not desirable, because we can do “other stuff” in the meantime (namely: run the
qa checks, because they don’t require a database) and thus save a couple of seconds on each CI
run.

Build target: ci

We’ve already introduced build targets in
Environments and build targets
and how to “choose”
them through make with the ENV variable defined in a shared .make/.env file.
Short recap:

Initialize make to run docker commands with ENV=ci

Build images for CI

  • in the Dockerfile of a service, define the ENV as a build stage. E.g. in
    .docker/images/php/base/Dockerfile

    FROM base as ci
    # ...

So to enable the new ci environment, we need to modify the Dockerfiles for the php-base and
the application image.

Build stage ci in the php-base image

Use the whole codebase as build context

As mentioned in section Docker changes we want to “bake” the codebase into
the ci image of the php-base container. Thus, we must change the context property in
.docker/docker-compose/docker-compose-php-base.yml to not only use the .docker/ directory
but instead the whole codebase
. I.e. “dont use ../ but ../../“:

# File: .docker/docker-compose/docker-compose-php-base.yml

  php-base:
    build:
      # pass the full codebase to docker for building the image
      context: ../../

Build the dependencies

The composer dependencies must be set up in the image as well, so we introduce a new stage
stage in .docker/images/php/base/Dockerfile. The most trivial solution would look like this:

  • copy the whole codebase
  • run composer install
FROM base as ci

COPY . /codebase

RUN composer install --no-scripts --no-plugins --no-progress -o

However, this approach has some downsides:

  • if any file in the codebase changes, the COPY . /codebase layer will be invalidated. I.e.
    docker could not use the layer cache
    which also means that every layer afterwards cannot use the cache as well. In consequence the
    composer install would run every time – even when the composer.json file doesn’t change.
  • composer itself uses a cache for
    storing dependencies locally so it doesn’t have to download dependencies that haven’t changed.
    But since we run composer install in Docker, this cache would be “thrown away” every time
    a build finishes. To mitigate that, we can use
    --mount=type=cache
    to define a directory that docker will re-use between builds:

    Contents of the cache directories persists between builder invocations without invalidating
    the instruction cache.

Keeping those points in mind, we end up with the following instructions:

# File: .docker/images/php/base/Dockerfile
# ...

FROM base as ci

# By only copying the composer files required to run composer install
# the layer will be cached and only invalidated when the composer dependencies are changed
COPY ./composer.json /dependencies/
COPY ./composer.lock /dependencies/

# use a cache mount to cache the composer dependencies
# this is essentially a cache that lives in Docker BuildKit (i.e. has nothing to do with the host system) 
RUN --mount=type=cache,target=/tmp/.composer \
    cd /dependencies && \
    # COMPOSER_HOME=/tmp/.composer sets the home directory of composer that
    # also controls where composer looks for the cache 
    # so we don't have to download dependencies again (if they are cached)
    COMPOSER_HOME=/tmp/.composer composer install --no-scripts --no-plugins --no-progress -o 

# copy the full codebase
COPY . /codebase

RUN mv /dependencies/vendor /codebase/vendor && \
    cd /codebase && \
    # remove files we don't require in the image to keep the image size small
    rm -rf .docker/ && \
    # we need a git repository for git-secret to work (can be an empty one)
    git init

FYI: The COPY . /codebase step doesn’t actually copy “everything in the repository”, because we
have also introduced a .dockerignore file to exclude some files from being included in the
build context – see section .dockerignore.

Some notes on the final RUN step:

  • rm -rf .docker/ doesn’t really save “that much” in the current setup – please take it more
    as an example to remove any files that shouldn’t end up in the final image (e.g. “tests in a
    production image”)
  • the git init part is required because we need to decrypt the secrets later – and
    git-secret requires a git repository (which can be empty). We can’t decrypt the secrets
    during the build, because we do not want decrypted secret files to end up in the image.

When tested locally, the difference between the trivial solution and the one that makes use of
layer caching is ~35 seconds, see the results in the Performance section.

Create the final image

As a final step, we will rename the current stage to codebase and copy the “build
artifact” from that stage into our final ci build stage:

FROM base as codebase

# build the composer dependencies and clean up the copied files
# ...

FROM base as ci

COPY --from=codebase --chown=$APP_USER_NAME:$APP_GROUP_NAME /codebase $APP_CODE_PATH

Why are we not just using the previous stage directly as ci?

Because using multistage-builds
is a
good practice to keep the final layers of an image to a minimum:
Everything that “happened” in the previous codebase stage will be “forgotten”, i.e. not
exported as layers.

That does not only save us some layers, but also allows us to get rid of
files like the .docker/ directory. We needed that directory in the build context because
some files where required in other parts of the Dockerfile (e.g. the php ini files), so we
can’t exclude it via .dockerignore. But we can remove it in the codebase stage – so it will NOT
be copied over and thus not end up in the final image. If we wouldn’t have the codebase stage,
the folder would be part of the layer created when COPYing all the files from the build context
and removing it via rm -rf .docker/ would have no effect on the image size.

Currently, that doesn’t really matter, because the building step is super simple (just a
composer install) – but in a growing and more complex codebase you can easily
save a couple MB.

To be concrete, the multistage build has 31 layers and the final layer containing the
codebase has a size of 65.1MB.

$ docker image history -H dofroscra/application-ci
IMAGE          CREATED          CREATED BY                                      SIZE      COMMENT
d778c2ee8d5e   17 minutes ago   COPY /codebase /var/www/app # buildkit          65.1MB    buildkit.dockerfile.v0
                                                                                ^^^^^^
<missing>      17 minutes ago   WORKDIR /var/www/app                            0B        buildkit.dockerfile.v0
<missing>      17 minutes ago   COPY /usr/bin/composer /usr/local/bin/compos…   2.36MB    buildkit.dockerfile.v0
<missing>      17 minutes ago   COPY ./.docker/images/php/base/.bashrc /root…   395B      buildkit.dockerfile.v0
<missing>      17 minutes ago   COPY ./.docker/images/php/base/.bashrc /home…   395B      buildkit.dockerfile.v0
<missing>      17 minutes ago   COPY ./.docker/images/php/base/conf.d/zz-app…   196B      buildkit.dockerfile.v0
<missing>      17 minutes ago   COPY ./.docker/images/php/base/conf.d/zz-app…   378B      buildkit.dockerfile.v0
<missing>      17 minutes ago   RUN |8 APP_USER_ID=10000 APP_GROUP_ID=10001 …   1.28kB    buildkit.dockerfile.v0
<missing>      17 minutes ago   RUN |8 APP_USER_ID=10000 APP_GROUP_ID=10001 …   41MB      buildkit.dockerfile.v0
<missing>      18 minutes ago   ADD https://php.hernandev.com/key/php-alpine…   451B      buildkit.dockerfile.v0
<missing>      18 minutes ago   RUN |8 APP_USER_ID=10000 APP_GROUP_ID=10001 …   62.1MB    buildkit.dockerfile.v0
<missing>      18 minutes ago   ADD https://gitsecret.jfrog.io/artifactory/a…   450B      buildkit.dockerfile.v0
<missing>      18 minutes ago   RUN |8 APP_USER_ID=10000 APP_GROUP_ID=10001 …   4.74kB    buildkit.dockerfile.v0
<missing>      18 minutes ago   ENV ENV=ci                                      0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ENV ALPINE_VERSION=3.15                         0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ENV TARGET_PHP_VERSION=8.1                      0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ENV APP_CODE_PATH=/var/www/app                  0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ENV APP_GROUP_NAME=application                  0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ENV APP_USER_NAME=application                   0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ENV APP_GROUP_ID=10001                          0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ENV APP_USER_ID=10000                           0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ARG ENV                                         0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ARG ALPINE_VERSION                              0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ARG TARGET_PHP_VERSION                          0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ARG APP_CODE_PATH                               0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ARG APP_GROUP_NAME                              0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ARG APP_USER_NAME                               0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ARG APP_GROUP_ID                                0B        buildkit.dockerfile.v0
<missing>      18 minutes ago   ARG APP_USER_ID                                 0B        buildkit.dockerfile.v0
<missing>      2 days ago       /bin/sh -c #(nop)  CMD ["/bin/sh"]              0B
<missing>      2 days ago       /bin/sh -c #(nop) ADD file:5d673d25da3a14ce1…   5.57MB

The non-multistage build has 32 layers and the final layer(s) containing the
codebase have a combined size of 65.15MB (60.3MB + 4.85MB).

$ docker image history -H dofroscra/application-ci
IMAGE          CREATED          CREATED BY                                      SIZE      COMMENT
94ba50438c9a   2 minutes ago    RUN /bin/sh -c COMPOSER_HOME=/tmp/.composer …   60.3MB    buildkit.dockerfile.v0
<missing>      2 minutes ago    COPY . /var/www/app # buildkit                  4.85MB    buildkit.dockerfile.v0
                                                                                ^^^^^^
<missing>      31 minutes ago   WORKDIR /var/www/app                            0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   COPY /usr/bin/composer /usr/local/bin/compos…   2.36MB    buildkit.dockerfile.v0
<missing>      31 minutes ago   COPY ./.docker/images/php/base/.bashrc /root…   395B      buildkit.dockerfile.v0
<missing>      31 minutes ago   COPY ./.docker/images/php/base/.bashrc /home…   395B      buildkit.dockerfile.v0
<missing>      31 minutes ago   COPY ./.docker/images/php/base/conf.d/zz-app…   196B      buildkit.dockerfile.v0
<missing>      31 minutes ago   COPY ./.docker/images/php/base/conf.d/zz-app…   378B      buildkit.dockerfile.v0
<missing>      31 minutes ago   RUN |8 APP_USER_ID=10000 APP_GROUP_ID=10001 …   1.28kB    buildkit.dockerfile.v0
<missing>      31 minutes ago   RUN |8 APP_USER_ID=10000 APP_GROUP_ID=10001 …   41MB      buildkit.dockerfile.v0
<missing>      31 minutes ago   ADD https://php.hernandev.com/key/php-alpine…   451B      buildkit.dockerfile.v0
<missing>      31 minutes ago   RUN |8 APP_USER_ID=10000 APP_GROUP_ID=10001 …   62.1MB    buildkit.dockerfile.v0
<missing>      31 minutes ago   ADD https://gitsecret.jfrog.io/artifactory/a…   450B      buildkit.dockerfile.v0
<missing>      31 minutes ago   RUN |8 APP_USER_ID=10000 APP_GROUP_ID=10001 …   4.74kB    buildkit.dockerfile.v0
<missing>      31 minutes ago   ENV ENV=ci                                      0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ENV ALPINE_VERSION=3.15                         0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ENV TARGET_PHP_VERSION=8.1                      0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ENV APP_CODE_PATH=/var/www/app                  0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ENV APP_GROUP_NAME=application                  0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ENV APP_USER_NAME=application                   0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ENV APP_GROUP_ID=10001                          0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ENV APP_USER_ID=10000                           0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ARG ENV                                         0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ARG ALPINE_VERSION                              0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ARG TARGET_PHP_VERSION                          0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ARG APP_CODE_PATH                               0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ARG APP_GROUP_NAME                              0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ARG APP_USER_NAME                               0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ARG APP_GROUP_ID                                0B        buildkit.dockerfile.v0
<missing>      31 minutes ago   ARG APP_USER_ID                                 0B        buildkit.dockerfile.v0
<missing>      2 days ago       /bin/sh -c #(nop)  CMD ["/bin/sh"]              0B
<missing>      2 days ago       /bin/sh -c #(nop) ADD file:5d673d25da3a14ce1…   5.57MB

Again: It is expected that the differences aren’t big, because the only size savings come from
the .docker/ directory with a size of ~70kb.

$ du -hd 0 .docker
73K     .docker

Finally, we are also using the --chown option of the RUN instruction
to ensure that the files have the correct permissions.

Build stage ci in the application image

There is actually “nothing” to be done here. We don’t need SSH any longer because it is only
required for the SSH Configuration of PhpStorm.
So the build stage is simply “empty”:

ARG BASE_IMAGE
FROM ${BASE_IMAGE} as base

FROM base as ci

FROM base as local
# ...

Though there is one thing to keep in mind: In the local image we used sshd as the entrypoint,
i.e. we had a long running process that would keep the container running. To keep the
ci application container running, we must

.dockerignore

The .dockerignore file
is located in the root of the repository and ensures that certain files are kept out of the
Docker build context. This will

  • speed up the build (because less files need to be transmitted to the docker daemon)
  • keep images smaller (because irrelevant files are kept out of the image)

The syntax is quite similar to the .gitignore file – in fact I’ve found it to be quite often
the case that the contents of the .gitignore file are a subset of the .dockerignore file. This
makes kinda sense, because you typically wouldn’t want files that are excluded from the
repository to end up in a docker image
(e.g. unencrypted secret files). This has also been
noticed by others, see e.g.

but to my knowledge there is currently (2022-04-24) no way to “keep the two files in sync”.

In our case, the content of the .dockerignore file looks like this:

# gitignore
!.env.example
.env
.idea
.phpunit.result.cache
vendor/
secret.gpg
.gitsecret/keys/random_seed
.gitsecret/keys/pubring.kbx~
!*.secret
passwords.txt
.build

# additionally ignored files
.git

Makefile changes

Initialize the shared variables

We have introduced the concept of shared variables via .make/.env
previously. It allows us to define variables in one place (=single source
of truth) that are then used as “defaults” so we don’t have to define them explicitly when
invoking certain make targets (like make docker-build). We’ll make use of this concept by
setting the environment to civiaENV=ci and thus making sure that all docker commands use
ci “automatically” as well.

Initialize make to run docker commands with ENV=ci

In addition, I made a small modification by introducing a second file at .make/variables.env
that is also included in the main Makefile and holds the “default” shared variables. Those
are neither “secret” nor are they likely to be be changed for environment adjustments. The file
is NOT ignored by .gitignore and is basically just the previous .make/.env.example file without
the environment specific variables:

# File .make/variables.env

DOCKER_REGISTRY=docker.io
DOCKER_NAMESPACE=dofroscra
APP_USER_NAME=application
APP_GROUP_NAME=application

The .make/.env file is still .gitignored and can be initialized with the make-init
target using the ENVS variable:

make make-init ENVS="ENV=ci SOME_OTHER_DEFAULT_VARIABLE=foo"

which would create a .make/.env file with the content

ENV=ci
SOME_OTHER_DEFAULT_VARIABLE=foo

If necessary, we could also override variables defined in the .make/variables.env file,
because the .make/.env is included last in the Makefile:

# File: Makefile
# ...

# include the default variables
include .make/variables.env
# include the local variables
-include .make/.env

The default value for ENVS is ENV=local TAG=latest to retain the same default behavior as
before when ENVS is omitted. The corresponding make-init target is defined in the main
Makefile and now looks like this:

ENVS?=ENV=local TAG=latest
.PHONY: make-init
make-init: ## Initializes the local .makefile/.env file with ENV variables for make. Use via ENVS="KEY_1=value1 KEY_2=value2"
    @$(if $(ENVS),,$(error ENVS is undefined))
    @rm  -f .make/.env
    for variable in $(ENVS); do \
      echo $$variable | tee -a .make/.env > /dev/null 2>&1; \
    done
    @echo  "Created a local .make/.env file" 

ENV based docker compose config

As mentioned in section Compose file updates we need to select the
“correct” docker compose configuration files based on the ENV value. This is done in
.make/02-00-docker.mk:

# File .make/02-00-docker.mk

# ...

DOCKER_COMPOSE_DIR:=...
DOCKER_COMPOSE_COMMAND:=...

DOCKER_COMPOSE_FILE_LOCAL_CI:=$(DOCKER_COMPOSE_DIR)/docker-compose.local.ci.yml
DOCKER_COMPOSE_FILE_CI:=$(DOCKER_COMPOSE_DIR)/docker-compose.ci.yml
DOCKER_COMPOSE_FILE_LOCAL:=$(DOCKER_COMPOSE_DIR)/docker-compose.local.yml

# we need to "assemble" the correct combination of docker-compose.yml config files
ifeq ($(ENV),ci)
    DOCKER_COMPOSE_FILES:=-f $(DOCKER_COMPOSE_FILE_LOCAL_CI) -f $(DOCKER_COMPOSE_FILE_CI)
else ifeq ($(ENV),local)
    DOCKER_COMPOSE_FILES:=-f $(DOCKER_COMPOSE_FILE_LOCAL_CI) -f $(DOCKER_COMPOSE_FILE_LOCAL)
endif

DOCKER_COMPOSE:=$(DOCKER_COMPOSE_COMMAND) $(DOCKER_COMPOSE_FILES)

When we now take a look at a full recipe when using ENV=ci with a docker target (e.g.
docker-up), we can see that the correct files are chosen, e.g.

$ make docker-up ENV=ci -n
ENV=ci TAG=latest DOCKER_REGISTRY=docker.io DOCKER_NAMESPACE=dofroscra APP_USER_NAME=application APP_GROUP_NAME=application docker compose -p dofroscra_ci --env-file ./.docker/.env -f ./.docker/docker-compose/docker-compose.local.ci.yml -f ./.docker/docker-compose/docker-compose.ci.yml up -d

# =>
# -f ./.docker/docker-compose/docker-compose.local.ci.yml 
# -f ./.docker/docker-compose/docker-compose.ci.yml

Assemble docker-compose config files for CI

Codebase changes

Add a test for encrypted files

We’ve introduced git-secret in the previous tutorial
Use git-secret to encrypt secrets in the repository
and used it to store the file passwords.txt encrypted in the codebase. To make sure that the
decryption works as expected on the CI systems, I’ve added a test at
tests/Feature/EncryptionTest.php to check if the file exists and if the content is correct.

class EncryptionTest extends TestCase
{
    public function test_ensure_that_the_secret_passwords_file_was_decrypted()
    {
        $pathToSecretFile = __DIR__."/../../passwords.txt";

        $this->assertFileExists($pathToSecretFile);

        $expected = "my_secret_password\n";
        $actual   = file_get_contents($pathToSecretFile);

        $this->assertEquals($expected, $actual);
    }
}

Of course this doesn’t make sense in a “real world scenario”, because the secret value would now
be exposed in a test – but it suffices for now as proof of a working secret decryption.

Add a password-protected secret gpg key

I’ve mentioned in
Scenario: Decrypt file
that it is also possible to use a password-protected secret gpg key for
an additional layer of security
. I have created such a key and stored it in the repository at
secret-protected.gpg.example (in a “real world scenario” I wouldn’t do that – but since this
is a public tutorial I want you to be able to follow along completely). The password for that
key is 12345678.

The corresponding public key is located at .dev/gpg-keys/alice-protected-public.gpg and
belongs to the email address [email protected]. I’ve
added this address and
re-encrypted the secrets afterwards via

make gpg-init
make secret-add-user EMAIL="[email protected]"
make secret-encrypt

When I now import the secret-protected.gpg.example key, I can decrypt the secrets, though I
cannot use the usual secret-decrypt target but must instead use secret-decrypt-with-password

make secret-decrypt-with-password GPG_PASSWORD=12345678

or store the GPG_PASSWORD in the .make/.env file when it is initialized for CI

make make-init ENVS="ENV=ci TAG=latest EXECUTE_IN_CONTAINER=true GPG_PASSWORD=12345678"
make secret-decrypt-with-password

Create a JUnit report from PhpUnit

I’ve added the
--log-junit option
to the phpunit configuration of the test make target in order to create an XML report in the
.build/ directory in the .make/01-02-application-qa.mk file:

# File: .make/01-02-application-qa.mk
# ...

PHPUNIT_CMD=php vendor/bin/phpunit
PHPUNIT_ARGS= -c phpunit.xml --log-junit .build/report.xml

I.e. each run of the tests will now create a
Junit XML report at
.build/report.xml. The file is used as an example of a build artifact, i.e.
“something that we would like to keep” from a CI run.

Wrapping up

Congratulations, you made it! If some things are not completely clear by now, don’t hesitate to
leave a comment. You should now have a working CI pipeline for Github (via Github Actions)
and/or Gitlab (via Gitlab pipelines) that runs automatically on each push.

In the next part of this tutorial, we will use terraform to create an infrastructure for
production deployments on GCP and deploy the docker containers there.

Please subscribe to the RSS feed or via email to get automatic
notifications when this next part comes out 🙂


Wanna stay in touch?

Since you ended up on this blog, chances are pretty high that you’re into Software Development
(probably PHP, Laravel, Docker or Google Big Query) and I’m a big fan of feedback and networking.

So – if you’d like to stay in touch, feel free to shoot me an email with a couple of words about yourself and/or
connect with me on
LinkedIn or
Twitter
or simply subscribe to my RSS feed
or go the crazy route and subscribe via mail
and don’t forget to leave a comment 🙂

Subscribe to posts via mail

Comments

Laravel News Links