All the Special Key Combinations that Change Your Mac’s Startup

All the Special Key Combinations that Change Your Mac's Startup

The startup sound is a Mac’s way of letting you know everything is okay, but sometimes, things go bad and you need to boot into a different mode then usual. Mac’s have a bunch of options for this, and all they require is that you hold down a keyboard shortcut at boot.

To boot into one of these modes, press and hold these key combinations immediately after you turn on your Mac. Keep holding them until your Mac boots into the mode you need. Here are the key combinations and what you’d use them for:

  • Shift: Starts your Mac in safe mode. This helps you troubleshoot because it only loads the minimum necessary kernels at boot then disables startup items, user-installed fonts, font caches, kernel caches, and other system cache files.
  • Option: This loads up the startup manager where you can pick between different hard drives or discs to boot into. If you need to boot from a hard drive different than your primary one, or you’re booting into Boot Camp, this is the key you push.
  • C: Boots from a bootable CD, DVD, or USB. This is useful when you’re installing a new operating system.
  • D or Option+D: Starts the Apple Hardware Test on pre-2013 Macs or Apple Diagnostics on newer Macs. Both are meant to help troubleshoot hardware issues.
  • N or Option+N: Starts up from a Netboot server. Most average users will never need to use this as it’s meant for running OS X off a network instead of a hard drive or disc drive.
  • Command+R: Starts up in Recovery mode. If you have problems with your hard drive, OS X Recovery allows you to restore your Mac from a backup, verify and repair your disc, check your internet connection, or reinstall OS X.
  • Command+Option+R: Starts up the internet version of Recovery mode, which works the same as regular Recovery mode, but is online.
  • Command+Option+P+R: This resets the NVRAM. NVRAM stores information about speaker volume, screen resolution, startup disk selection, and recent kernel panic information. If you’re having issues with sound or video, it’s usually a good idea to reset the NVRAM before panicking.
  • Command+S: Starts up in single-user mode. This is meant mostly for developers and IT as a means to troubleshoot startup issues and basically drops you into the command line where you can run tests without worrying about the GUI in OS X.
  • Command+V: Starts up in verbose mode. Verbose mode is similar to single-user mode but is meant more as a way to watch what a computer is doing to help with troubleshooting.
  • T: Starts your Mac in target disk mode. This is a useful way to share files between two Macs when one of them is broken or the display isn’t working.
  • Eject button, F12, mouse button, or trackpad button: Force eject an optical disk.

With all those options, you should be able to troubleshoot your way through some of a Mac’s worst problems.

http://ift.tt/1YVglEJ…


Contact the author at thorin@lifehacker.com.


via Lifehacker
All the Special Key Combinations that Change Your Mac’s Startup