DIY Improvements for Howard Leight Impact Sport Electronic Ear Protection

Howard Leight Impact Sport DIY Improvement
Howard Leight Impact Sport DIY Improvement

U.S.A. –-(Ammoland.com)–  The Howard Leight Impact Sport electronic ear protection is certainly among the most commonly used ear-pro you’ll find at the shooting ranges of America today.  I’ve used various versions of the Leights for more than a decade, and am more than familiar with its features and shortfalls (review here).  Being popular and common in use is great, but that doesn’t mean there isn’t room for growth.  Behold, two simple ways you can DIY improve your Howard Leight Impact Sport headsets.  One is nearly free, and the other is a lot cheaper than a hearing aid.

Howard Leight Impact Sport DIY Improvement
Shown: everything you need. New gel cups and foam from an old rifle case.

Before we can dive in to improvements, lets identify the shortcomings that lead the Impact Sports to a middle-of-the-pack 22 dB Noise Reduction Rating (NRR).

  1.  The earcups.  The stock earcups are a little bit of what feels like vinyl, filled with the least dense foam imaginable.  Each cup weight 9 grams, and does little to stop sound.  The OEM cups also deteriorate quickly, causing them to stiffen up.  Once that happens, it’s very easy to “break the seal” around your ear, and let in a full-volume blast of noise.  Honeywell (Howard Leight parent company) recommends replacing the  cups every 6 months, at around $15-$20 a year for upkeep.
  2. Dead space.  If you pop open the ear cups (as I do below), you’ll see a lot of empty space.  Open space like that does nothing to stop noise from blowing right through.  We need to fill that up to improve the sound absorption!

So let’s disassemble our ear pro.  First, grab the original foam ear cups and give them a pull.  They’re held in with a few retaining tabs, and pop out easily.

Howard Leight Impact Sport DIY Improvement
First, grab the original foam ear cups and give them a pull.

Next, use a flathead screwdriver to pop off the plastic rim that held in the ear cups.  Once off, set those (and the small foam sheet underneath) to the side.

 

Howard Leight Impact Sport DIY Improvement
Next, use a flathead screwdriver to pop off the plastic rim that held in the ear cups.

Now you can see into the belly of the beast.  The left side (as worn), which has the volume adjustment knob, has a bit more material inside, as it contains the circuit board and internal section of the volume knob.  Don’t let looks deceive you though, there’s a lot more space than it seems at first glance.

Howard Leight Impact Sport DIY Improvement
Left side
Howard Leight Impact Sport DIY Improvement
Right side

So now we’re at the spot where we can make a big difference, for very little money.  We need to fill up all that empty space!  On this headset I used foam from an old, unused gun case.  I used my screwdriver to (carefully!) squeeze as much extra foam into the case as I could.

Howard Leight Impact Sport DIY Improvement
On this headset I used foam from an old, unused gun case.
Howard Leight Impact Sport DIY Improvement
Left side
Howard Leight Impact Sport DIY Improvement
Right side

It’s OK if some of the foam is a little loose, or if it sticks out slightly above the lip of the case.  When we reassemble, the foam sheet that goes under the ear cup retaining ring will hold everything in.  I’ll take a moment to mention foam isn’t the only thing you can use to fill the empty space in the case.  I’ve also used silicon caulking and liquid electrical tape in conjunction with foam for good effect.  I put up a video showing this process years ago.  The silicone worked well, though it’s not much better (if at all) than foam, and much more permanent.

Howard Leight DIY improvement
I’ve also used silicon caulking and liquid electrical tape in conjunction with foam for good effect.

Let’s reassemble!  Lay your foam sheet back on.

Howard Leight Impact Sport DIY Improvement
Howard Leight Impact Sport DIY Improvement
Howard Leight Impact Sport DIY Improvement
Snap the ear cup retaining ring back on.

Now let’s pause.  We’re not putting the stock ear cups back on, instead we’re using Sightlines gel cups from Noisefighters.  The Sightlines improves the effectiveness of ear pro such as the Howard Leights in a few ways.

  1.  They’re more comfortable.  This is especially true with eye protection on, as the Sightlines have channels cut out for the ear bridge of your glasses.  No more temple-pressure induced headaches while shooting!
  2. They seal better.  Being gel rather than vinyl/foam, the Sightlines cups contour to your head and maintain the ear seal.  If you’ve had the ear seal unexpectedly give out while someone is firing off a rifle with a massive muzzle break next to you, you’ll immediately see the benefit here.
  3. They reduce ambient noise passing into your ear.  Simply put, there’s more material that sound has to pass through to get to your ear canal.  I have an old set of Gen 1 Sightlines, they weight in at 33 grams, versus 9 grams for the OEM’s.  That’s a 366% increase in material!
  4. They’re cheaper than maintaining the OEM cups as recommended.  Honeywell wants you to spend $15-$20 a year.  The Sightlines last much longer, and run $40.  My Gen 1 Sightlines are over a year and a half old, and still look just like the brand new Gen 2’s despite regular use.
Howard Leight Impact Sport DIY Improvement
They seal better.  Being gel rather than vinyl/foam, the Sightlines cups contour to your head and maintain the ear seal.

OK, let’s get back to reassembly.  While the Gen 1 Noisefighters Sightlines gel cups simply snapped back into the retaining tabs, the Gen 2 Sightlines have a pressure sensitive, non-permanent adhesive.  Peel the backing sheet off, then carefully align and press in the gel cups.  Once they’re in, give them a firm press to make sure the adhesive is all the way in.

Howard Leight Impact Sport DIY Improvement
That’s it!  Your DIY improvements are done.

That’s it!  Your DIY improvements are done.  Even comparing performance at low levels of sound (same Megadeth song, same volume, same distance) the improved Howard Leight Impact Sport headset shows a noticeable sound reduction with the electronics off against the unimproved set.  That improvement is greatly exacerbated at louder volumes, such as at the shooting range.  Given that the difference is easily apparent to the naked ear means that we’ve improved our headsets by at least 1 decibel.  Since decibels are logarithmic, not linear, the jump from 22 dB NRR to 23 (or greater) dB NRR is a significant reduction in sound pressure slamming into your eardrum.

As someone who’s dealt with significant hearing loss since my early twenties, take it from me:  good ear protection is always worth the money.  Get the best set you can, whether by buying it or improving a good set into a great one.  There are more ways to improve ear pro than the ones I’ve listed, if you have a cool technique post it in the comments below so all shooters have the chance to benefit!


About Rex NanorumJens Hammer

Rex Nanorum is an Alaskan Expatriate living in Oregon with his wife and kids. Growing up on commercial fishing vessels, he found his next adventure with the 2nd Bn, 75th Ranger Regt. After 5 tours to Afghanistan and Iraq, he adventured about the west coast becoming a commercial fisheries and salvage SCUBA diver, rated helicopter pilot instructor (CFII) and personal trainer, before becoming a gear reviewer and writer.”

-Rex Nanorum

@Rexnanorum

The post DIY Improvements for Howard Leight Impact Sport Electronic Ear Protection appeared first on AmmoLand.com.

via AmmoLand.com
DIY Improvements for Howard Leight Impact Sport Electronic Ear Protection