Open-Source ESP32 remote controls thousands of devices

https://cdn-blog.adafruit.com/uploads/2026/11/open-source-esp32-remote-controls-thousands-of-devices.jpg

Open-Source ESP32 remote controls thousands of devices

Ananthu Ashok, writing for Open Source For You, covers IRis, an open-source universal infrared remote built around an ESP32 by Nicolas Ruiz Neiman. It learns commands from existing remotes, stores them and replays them to control other devices.

The build uses an ESP32-WROOM-32 module, a 1.3 inch OLED screen and five push buttons for the menu. A TSOP38238 receiver picks up the incoming signals, and two infrared LEDs driven by a 2N2222 transistor send them back out. The parts are in a 3D-printed case powered by an 18650 lithium-ion cell.

IRis decodes NEC, Samsung, Sony SIRC, RC5 and JVC, saving the protocol, address and command. Signals it can’t identify are recorded raw. Captured commands can be grouped into virtual remotes, and the project can pull from the Flipper-IRDB code database. A Python tool converts LIRC files and Pronto hex codes to .ir files. A “Be Gone” mode sends the power commands for a whole category of remotes.

The project is under GPL v3.0, with firmware, wiring diagrams, a bill of materials, assembly notes and the 3D files published. Pre-compiled firmware is offered too.

See more at opensourceforu.com and content on GitHub.

3D printing – Adafruit Industries – Makers, hackers, artists, designers and engineers!